Products Information
Products Information >

Baler

  • MSW(Municipal Solid Waste) Baler

    An Equipment to decrease the Volume of the MSW that are not separated, after Automatic Compression and Bundling for easy Transportation.

    • (1)

      Merits

    • Saving of Installation Space and Improvement of Compression Rate by adopting the Vertical Switch Type Discharge Door

    • Reinforcement of Durability through the Painting Process by use of 3 Stages Micro-spray.

    • Minimize the Surroundings Pollution through the Automatic Stop of Waste Supply at time of Bail Discharging

    • Minimize the Slight Failure by Pollution due to the Use of Materials over STS304 for the Main Components.

    • (2)

      Equipment Composition

    • 1)

      Input Hopper

    • 2)

      Compression Room

    • 3)

      Cylinder

    • 4)

      Compression Push Plate

    • 5)

      Control Panel

    • (3)

      Equipment Specification

    • 1)

      Type : Horizontal Type Automatic Hydraulic Compression

    • 2)

      Compression Power : Changing is available according to the Treatment Capacity, and the Weight of the Compressed Things.

    • 3)

      Working Pressure : Changed according to the Treatment Capacity, and the Weight of the Compressed Things.

    • 4)

      Material : Over SS400 or Equivalent

    • 5)

      Control Method : PLC Control System

    • 6)

      Main motor power : 37 ~ 180kW

    • 7)

      Throughput : 5.0 ~ 80.0 ton/hr

    생활폐기물압축기

    생활폐기물압축기

  • Baler for Plastics

    An Equipment to decrease the Volume of the Waste Plastics separated, after Automatic Compression and Bundling for easy Transportation.

    • 1)

      Merits

    • Saving of Installation Space and Improvement of Compression Rate by adopting the Vertical Switch Type Discharge Door

    • Reinforcement of Durability through the Painting Process by use of 3 Stages Micro-spray.

    • Minimize the Surroundings Pollution through the Automatic Stop of Waste Supply at time of Bail Discharging

    • Minimize the Slight Failure by Pollution due to the Use of Materials over STS304 for the Main Components.

    • 2)

      Equipment Composition

    • 1

      Input Hopper

    • 2

      Compression Room

    • 3

      Cylinder

    • 4

      Compression Push Plate

    • 5

      Control Panel

    • 3)

      Equipment Specification

    • 1

      Type : Horizontal Type Automatic Hydraulic Compression

    • 2

      Size : W4400mm x H3200mm x L8600mm

    • 3

      Bale size : W1050 x H1100 x L(adjustable)

    • 4

      Bundling : 5Lines Bundling Method, Steel Wire is used

    • 5

      Main motor power : 30 ~ 75kW

    • 6

      Throughput : 2.0 ~ 5.0 ton/hr

    플라스틱압축기

    플라스틱압축기

    플라스틱압축기

    플라스틱압축기

  • Baler for Vinyl and Paper
    • (1)

      An Equipment to decrease the Volume of the Waste Papers separated, after Automatic Compression and Bundling for easy Transportation.

    • (2)

      Merits

    • Saving of Installation Space and Improvement of Compression Rate by adopting the Vertical Switch Type Discharge Door

    • Reinforcement of Durability through the Painting Process by use of 3 Stages Micro-spray.

    • Minimize the Surroundings Pollution through the Automatic Stop of Waste Supply at time of Bail Discharging

    • Minimize the Slight Failure by Pollution due to the Use of Materials over STS304 for the Main Components.

    • (3)

      Equipment Composition

    • 1)

      Input Hopper

    • 2)

      Compression Room

    • 3)

      Cylinder

    • 4)

      Compression Push Plate

    • 5)

      Control Panel

    • (3)

      Equipment Composition

    • 1)

      Type : Horizontal Type Automatic Hydraulic Compression, Automatic Binding

    • 2)

      Size : W4400mm x H3200mm x L8600mm

    • 3)

      Bale size : W1050 x H1100 x L(adjustable)

    • 4)

      Bundling : 5Lines Bundling Method, Steel Wire is used

    • 5)

      Main motor power : 30 ~ 75kW

    • 6)

      Throughput : 2.0 ~ 7.0 ton/hr

    종이비닐압축기

    종이비닐압축기

    종이비닐압축기

    종이비닐압축기

  • Compactor for Metal

    An Equipment being installed to save the Storage and Transportation Cost by decreasing the Volume of the Ferrous Metals and Cans which are separated and collected.

    • (1)

      Merits

    • Saving of Installation Space and Improvement of Compression Rate by adopting the Vertical Switch Type Discharge Door.

    • Minimize the Slight Failure by Pollution due to the Use of Materials over STS304 for the Main Components.

    • Compression Power is excellent, and Storage and Transportation are easy.

    • (2)

      Equipment Composition

    • 1)

      Input Hopper

    • 2)

      Compression Room

    • 3)

      Cylinder

    • 4)

      Compression Push Plate

    • 5)

      Control Panel

    • (3)

      Equipment Specification

    • 1)

      Input Hopper1) Frame : W1000mm x H750mm x L4245mm

    • 2)

      1) Driving Motor : 22.5kW

    • 3)

      1) Bale size : W500mm x H500mm x L150mm

    • 4)

      1) Throughput : 1.0 ~ 2.0tons/hr

    캔압축기

    캔압축기

    캔압축기

    캔압축기

상단으로 바로가기